Field equipment

The JOSKIN Trans-SPACE agricultural tipping trailers embody the new generation of monocoque tipping trailers. The floor of the Trans-Space 7500 is made of Hardo 450 steel, highly resistant to wear and tear. The Walls are made of 4 mm thick HLE 550 steel with a upper strip of the same material. The strength of this steel is so high that less reinforcements are needed than with a conventional concept. To increase the capacity of the trailer extensions are optional available.

In the front of the trailer 4 perspex covered windows are placed with a width of 21cm and a height of 38cm. The front is also fitted with hooks to hang a cover for the trailer.
The chassis of the trailer is made of 300x100x10mm tubes. The width is 900mm. To be able to stop safely with a loaded trailer hydraulic brakes are mounted on both axles. These axles are hung-up with parabolic leafsprings to ensure a good driveability in all circumstances. On the axles 400R22.5 wheels are mounted. The trailer is equipped with a big tipping cylinder which hangs in an oscillating frame. The rear door is made out of 1 part and opens hydraulically. This door is also equipped with a grain chute of 500x500mm. On the drawbar a hydraulic operated skid is mounted that functions as a park stand. All hydraulic functions except the brakes are connected to a single distributor.

To comply with rules and regulations concerning the road safety the trailer is standard equipped with double lights which are mounted to a swivelling frame. Galvanized mudguards are also standard equipment.

The tractor needs minimal 62 liters of hydraulic oil to be able to fully tip the trailer.