X
Menu
X

Hortech - 2

Self-propelled harvesting machine, for baby leaf, model Slide FW 150

SLIDE FW is an harvesting machine for baby leaf. Designed to work especially in glasshouses, it is able, thanks to its four-wheel drive system, to satisfy the requirements of the growers that work in open field, even if the soil is very wet. It is equipped with a steering – wheel instead of a joystick and the transfer speed is really more than 10 km/h. SLIDE FW can be equipped with several accessories for the product processing as well. The product can be put into boxes that are then stocked on a pallet put on the soil through a fork – lift truck mounted on the back of the machine. Or in the case of some kind of vegetables (i. e.: spinach), they can be unloaded through a lateral belt into a trailer or something like this, or, like in the case of parsley, they can be harvested and forwarded till the processing belt through some driving belts.

Description Options

Description

SLIDE FW is an harvesting machine for baby leaf. Designed to work especially in glasshouses, it is able, thanks to its four-wheel drive system, to satisfy the requirements of the growers that work in open field, even if the soil is very wet. It is equipped with a steering - wheel instead of a joystick and the transfer speed is really more than 10 km/h. SLIDE FW can be equipped with several accessories for the product processing as well. The product can be put into boxes that are then stocked on a pallet put on the soil through a fork - lift truck mounted on the back of the machine. Or in the case of some kind of vegetables (i. e.: spinach), they can be unloaded through a lateral belt into a trailer or something like this, or, like in the case of parsley, they can be harvested and forwarded till the processing belt through some driving belts.

Equipped with 4 wheels drive

Standard equipment:
- Belt width 150 cm
- Stainless steel belt support;
- Standard blade sidelight till 40 cm;
- Cutting belt turning on self-centering pulleys covered by rubber that guarantee for a better liability and life of the blade;
- Lateral room space (23 cm on each side, where the pulleys are mounted). It avoids to ruin the product on both side of the machine;
- Cutting system with single blade;
- Hydraulic cutting height device in the panel control with level Indicator;
- Hydraulic belt movement;
- Adjustable belt speed by manual valve;
- Temporary electric stop device in the forward movement and recovery at the same speed;
- Belt according to the law for nourishing product;
- Changeable capacity pump;
- Kubota engine, 4 cylinders, 32 hp;
- Driving system with steering wheel;
- Proportional speed from 0 till 10 km/h;
- Double feed system, that permits on the one hand to move the machine using a proportional pedal, and on the other hand, permits to the operator to have the possibility to decide to set a constant speed during the work, according to the kind of vegetable to be harvested.
- Possibility to stop the machine and start it, once again, at the same speed previously set by the operator;
- Box support to fill them higgledy-piggledy;
- Standard platform: max length 2300 mm (width depends on the model).

Options

SLIDEFW.03Driving system with automatic pilot
SLIDEFW.04Light
SLIDEFW.07Wind protection
SLIDEFW.09DXLateral footboard for full and empty boxes (800x1.250mm)
SLIDEFW.10Shadow-roof for slide FW
SLIDEFW.14Cutting height controlled by a proportional electro-hydraulic sensor.
 
Dealers near your location