The SN-1-130 model is suitable for the sowing of all types of vegetables. The single line sowing system is based on one outlet coulter and a disc with one line of holes. This multipurpose machine can be fitted with as many seeding units as needed to meet the specific requirements of the farmer and equipped with everything necessary to handle all the different types of seed. The tool bar ensures easy movement of the units to obtain the required distances between the rows.
- The disc turns in the opposite direction of travel. This direction of rotation minimizes "bounce" of the seeds leading to much more accurate placement.
- Norton gear system provides simple and fast gear change to vary seed spacing.
- All sowing units are equipped with top and bottom singulators to ensure accurate singulation and with four sprockets for the rotation of the disc.
- A separate compressor is used to keep the seed holes in the disc clear, rather than relying of the exhaust of the suction fan. This ensures that only dry and clean air, at the correct pressure, is used. This is particularly important with small seeds, especially if they are dressed or dusty.
Standaard equiped with:
21 std sowing elements,
21 sowing rows,
steel seed press wheels
rubber front 80 mm wheels,
rubber rear 80 mm wheels,
single line coulters,
6.5 m. tool bar,
QUEBEC fixed three point hitch cat. 2,
2 standard gearboxes 10+10,
22/18 tooth sprockets fitted,
21 single line sowing discs to be defined