Field equipment

The JOSKIN Trans-SPACE agricultural tipping trailers embody the new generation of monocoque tipping trailers. The floor of the Trans-Space 8000 is made of Hardo 450 steel, highly resistant to wear and tear. The Walls are made of 4 mm thick HLE 550 steel with a upper strip of the same material. The strength of this steel is so high that less reinforcements are needed than with a conventional concept. To increase the capacity of the trailer extensions are optional available.

In the front of the trailer 4 perspex covered windows are placed with a width of 21cm and a height of 38cm. The front is also fitted with hooks to hang a cover for the trailer.
The chassis of the trailer is made of 300x100x10mm tubes. The width is 900mm. To be able to drive safely with a loaded trailer pneumatic brakes are mounted behind the 400R22.5 wheels and the axles are hung-up with parabolic leaf springs to ensure a good driveability under all circumstances. The trailer is equipped with a big tipping cylinder which hangs in an oscillating frame. The rear door is made out of 1 part and opens hydraulically. This door is also equipped with a grain chute of 500x500mm. On the drawbar a hydraulic operated skid is mounted that functions as a park stand. All hydraulic functions except the brakes are connected to a single distributor.

The 8000 serie is equipped with the special Hydro-Tridem chassis. This has hydraulic axle suspension and also forced steering on the front and rear axle. The front axle is also hydraulic liftable. To be able to safely tip this big trailer the chassis also has a hydraulic stabilizer.

To comply with rules and regulations concerning the road safety the trailer is standard equipped with double lights which are mounted to a swivelling frame. Galvanized mudguards are also standard equipment.

The tractor needs minimal 70 liters of hydraulic oil to be able to fully tip the trailer.