Field equipment

Dewulf's 2-row self-propelled, off set harvester with large bunker.
Equipped with 3 hydraulic driven sieving webs, the Dewulf R3060 provides small drops and excellent sieving capacity. The advantage of the hydraulic driven webs is that the direction and speed of all webs are adjustable depending on the field conditions.
The R3060 comes standard equipped with a front mounted, modern haulm separator manufactured from wear-resistant Hardox steel and equipped with depth control and side-shift. This results in perfect positioning along the ridges and optimal removal of the haulm, even in the curves. The depth can be adjusted automatically from the cabin.

R3060 adapt the technique of offset harvesting, which makes sure that the ridges are not compressed and the soil can be sieved much better. With the combination of speed adjustable agitators in the web(s) a great sieving result will be achieved. Agitators can also be switched on/off from the cabin.

The wide, open ring elevator fills homogeneously across the entire width, rotates slower and hence maintains its sieving capacity. This way, quality losses are reduced to a minimum.

The inspection table offers space for >4 people to visual inspect the product before it reaches the 7 tons bunker.
The inspection table ends directly in the bunker, where the product will be stored.
The bunker create a smooth and product friendly transition of the product to a trailer.
The design of the bunker makes it possible to unload the bunker while harvesting continuous, this is increasing the productivity up to 25%!

Stability of the machine is an important aspect regarding the intake of the product. Too much balancing of the machine can have a negative effect of this. Large wheels ensures an optimal stability and ground clearance in the field. In combination with a balanced weight distribution, low ground pressure is obtained.

The robust mono chassis guarantees a superior durability with a low weight. The open construction provides a considerably improved view of the harvesting process.

Standard you have an easily and quick access to all main components in order to do the proper maintenance. Beside of that Dewulf's machines are equipped with standard parts which are worldwide easily available.

Dewulf R3060 creates an ergonomic way of working, which enables the operator to work in a friendly environment, in order to optimize the harvesting quality, even during long days of working.
The new control via the ergonomic joystick, (which is very comfortable in the hand and easy to operate) harvesting display and traction display allow the driver to operate the machine easily and comfortably.
All controls have been placed close to the operator to allow easy and convenient operation.
There are pedals to operate the rear steering and levelling of the machine. In the cabin, the entire product flow can be monitored using the cameras and colour monitor(s).

Unique points:
- Possibility to be adapted to all kind of field circumstances
- High capacity
- Strong and open chassis
- Proven and tested worldwide
- Professional control system for drive (DCU) and harvesting (HCU) control with user friendly joystick
- Maintenance-free components
- Standard spare parts, worldwide available
- Fully hydraulic control
- Large wheels, which guarantees drive ability in all conditions
- Very manoeuverable machine
- Unloading of the bunker while harvesting continuous (+25% productivity increase!)
- 2 Hedgehog belts with adjustable speed and inclination, as an additional cleaning
- Haulm web (which goes beyond 3rd web and lower hedgehog belt) equipped with spring loaded haulm finger
- Cleaning module: axial rollers with speed and angle adjustment
- Making use of the advantage; that product is first passing over the wide lower hedgehog belt which breaks up the large clods before they reach the axial rollers. This result in great sieving capacity
- Different, interchangeable cleaning module possibilities (Easy Clean module and/or web module)

Machine is standard equipped with:
- Cabine: CLAAS: windscreen wipers, radio, Grammer pneumatic seat, adjustable steering wheel, 2 adjustable and heated wing mirrors. An extra frame is added at the right side of the driver where extra equipment can be added (GPS, cell phone holder, ... )
- Air conditioning with adjustable ventilators
- Operating system: DCU and HCU [drive control-unit (DCU) on the top to set the adjustments of the drive functions; harvesting control-unit (HCU) on the bottom to set the adjustments of the harvesting functions] + user friendly joystick + 20 quick acces buttons to go directly into the mostly used functions. 5 different pre-set can be adjusted: this makes it possible to set all the harvesting parameters during harvest with just 1 push on the joystick
- Diesel engine SCANIA DC9 85A 257 KW (350 HP) Tier IV Final (ad blue) with cooler (water / air / oil); rpm on the road: 1.300, rpm in the field: 1.600
- Fuel tank capacity: +/- 800 l // AdBlue tank capacity: 60 l
- Set of tyres: front and right rear wheel are twin tires (for crop protection), Mitas 380/90 R46, left rear wheel Michelin 1000/50 R25.
- Steered rear axle (18°) operated by 2 pedals in the cabin with wheel position indication and automatic neutral position of the steered wheels
- Hydrostatic 3-wheel drive continuously variable (0-20 to 30 km/h depending on local regulations), 5 gears  of which 4 freely adjustable in the DCU. The traction can be adjusted per wheel, so that you can keep harvesting even in the worst circumstances and weather conditions. You can also choose to harvest in automatic gear.
- Automatic greasing system
- Automatic oil system for bunker chain
- Machine inclination = automatic levelling + manual operation with control pedals
- Haulm topper (2 row) with side removal to the right side. Rotor with ridge shaped flails. The haulm chopper is connected to the frame of the front wheel with side-shift option so that the haulm topper gives the best results even in curved fields. ADC (Automatic Depth Control) with 2 skids makes sure a perfect pulverization. The hood of the haulm topper is made out of durable material.
- Harvesting unit : 2 diabolos, 2 single harvesting shares together adjustable in inclination, 2 haulm intake rollers and APC (Automatic Pressure Contol = adjustable weight relief on the harvesting unit, adjustable per 1 bar)
- Harvesting unit 1.500 mm
- Sieving conveyor 1: width 1.500 mm, length 1.800 mm, hydraulically driven with PU drive sprockets (ø 180-220 mm depending on the pitch), speed and turning direction are adjustable from the cabin
- Sieving conveyor 2: width 1.650 mm, length 3.500 mm, hydraulically driven with divisible universal rollers (ø 220mm), speed and turning direction are adjustable from the cabin. Standard equipped with 3 hydraulically driven agitators: 1 star agitator (on/off and speed are adjustable from the cabin) and 2 eccentric agitators (separately on/off + speed together adjustable from the cabin)
- Haulm conveyor: haulm web; width 1.650mm, length 3.500mm, pinion drive, adjustable in speed from the cabin. 3 Haulm springs sets, individually hydraulic adjustable in height with 3 driven rollers. (No haulm roller in Q-system!)
- Extra fully closed bar web to make a smooth separation from haulm and product, which falls with constant height through the haulm web on this fully closed bar web. Adjustable in speed on the machine, related to the speed of the haulm web.
- Sieving conveyor 3: width 1.650 mm, length 2.420 mm, drive with cam wheels, speed is adjustable from the cabin
- Hedgehog unit 1: width 1.650 mm, length 1.100 mm, hydraulically driven with divisible universal rollers (ø 180 mm), inclination angle and speed are adjustable from the cabin, hydraulically driven counter roller.
- Axial module: 18 Rollers, speed and inclination (12,5°) adjustable from the cabin, has an anti blocking system. Quickly interchangeable with optional sieving module, easy-clean module or