The MC range of transport conveyors is designed with a 80cm wide PVC conveyor, with a capacity up to 130t/hr. User friendliness, reliability and capacity are the main characteristics for those MC conveyors.
Thanks to its narrow construction and the optional integrated flattening set, which
transforms the trough belt to a flat belt, the transport conveyors can also be used to inspect the
The trough shaped conveyor assures a large product flow on the conveyor and the thick layer of products reduces the dropping heights and thus damages to the product.
The PVC conveyor with integrated scrapers assures that soil cannot stick on the conveyor belt.
The MC series is fitted with a strong, simple extension mechanism. A centrally located control cabinet provides easy operation from both sides. The drawbar can be attached in two positions, so the transport conveyor can always be moved with the forklift. The discharge height is adjustable up to 220 cm, the conveyors can be used for various purposes, such as filling both the MB 33 and MB 55 box fillers.
The MC is equipped with variable belt speed adjustment.
The product does not touch any metal or painted components. This will prevent internal bruising and paint chips sticking to the products.
No support rollers at the infeed of the conveyor, for product friendly loading
Endless PVC conveyor to prevent soil from sticking to the conveyor belt
In the return parts of the conveyor a special belt guide system prevents running the conveyor out of alignment
Variable adjustable belt scraper
Horizontal rubber flap for product friendly transfer to next conveyor
Drawbar with 2 positions
Manual height adjustment (output side) by means of a hydraulic hand pump
Manual height adjustment by means of a mechanical spindle (input side), left and right side are separate adjustable
Manual operated length adjustment with a free wheel function in case of coupled with ML store loader
The coupling section assures the product to be dropped in the center of the conveyor irrespective of the
position of the supply
The hopper is mounted onto the coupling carriage, so it is not necessary to reposition the hopper towards the supply conveyor when the length of the MC is adjusted
Variable belt speed
Including the following options:
Belt 80cm (PVC) MC 980/1780
Drum motor MC 1780 Farmer, 21/42 m/min
Basic undercarriage with 4x2 solid swivel wheels
Manual length adjustment with freewheel function
Start-Control end stop
Min.-max. length conveyor (cm) 1.042 - 1.680
Belt width (cm) 80
Input height (cm) min. - max. 80 - 140
Output height (cm) min. - max. 88 - 220
Belt material PVC
Belt speed (m/min) 20 - 72 (variable speed)
Wheels (front) 4x2 Plastic swiveling wheels with brakes
Wheels (rear) 2x Swiveling pneumatic tires