Miedema fully automatic box fillers guarantee fast and product-friendly filling of your boxes. The Miedema box filler guarantees the best possible box filling in each size. The 80 cm wide conveyor is tipping into the box to reduce drop heights. To fill the box in layers, the conveyor can move left/right as well.
Drop heights are minimized due to the use of sensitive product sensors. When full boxes are replaced with empty boxes on time the machine will carry on filling fully automatically and without interruption.
Miedema box fillers can handle standard box sizes up to 260 cm. Because the overall height of the box filler can be adjusted, you can use boxes up to a height of 138 cm
The clear HMI display makes operating our box filler very easy and fast. There is no text to read; clear icons quickly show you the functions of the machine and the status of the box.
All hydraulic and electric components of the machine have been concealed in the main frame.
The filling belt is a belt with two ends that are lowered into the box and move from left to right.
The sloping parts of the filling belt have been fitted with arresters with rubber flaps that move along in order to slow down the product.
Sturdy box stops with integrated box detection sensors.
The overall height of the box filler can be adjusted to the box size: the higher the box, the higher the legs of the box filler should be set.
The box filler is operated fully from the HMI, the new operator display.
Several box sizes have been preprogrammed.
The display shows no text, all communication is done by clear icons.
Including the following options:
HMI with colour display
Voltage 380-420V / 50Hz / 3~
Control box 380-420V / 50Hz / 3~ KVB 1-2 motors
Box length 1600-2400 mm
Box width inside >950 mm
Box height 950-1570 mm
KVB 400/75 MB 33 75 cm (Box: W min 950 mm)
Drive KVB with 1 motor, 75 cm
Connection plate RT 30 - boxfiller