Manter – RSB-P SST version, right version for poly up to 950 mm height

Manter

Manter – Poly filling and sealing machine made of stainless steel for either pre-fabricated bags or half tube…

Description

Poly filling and sealing machine made of stainless steel for either pre-fabricated bags or half tube PE poly from the roll. When the bag is filled it is separated and then closed by a horizontal closing unit. For this horizontal closing unit, several options are available like a horizontal heat sealer or different kinds of tail closing units with a plastic clip. Because the machine is working with an open and close filling hole, an extra high transport strip (60mm) is not needed on the foil from the roll. This leads to a material saving up to 5%. Furthermore, Manter packing machines are known for the following characteristics: – Lowest TCO available in the market – Heavily constructed frame – Safe and easy to operate

Additional information

Specifications

1* depending on fill opening:
2* depending on product, bag and discharge system:
Air consumption (conditioned dry air): 250 l/min at 6 bar
Capacity at 2,5 kg bags: 28 pcs/minute
Foil height (mm): 300 – 700
Foil thickness (μm): 35 – 65
Foil width (mm): 250 – 450
LxWxH (cm): 480x120x200
Packed weight (kg): 0,5 – 10 (2*)
Power consumption (kW): 6
Supply voltage (V): 3x 400 Volt/50 Hz + N + GND
Weight (kg): 600