X
Menu
X

Engineering

Engineering

RSB-P including open and close filling hole

Manter

RSB-P including open and close filling hole

Poly filling and sealing machine for either pre-fabricated bags or half tube PE poly from the roll. When the bag is filled it is separated and then closed by a horizontal closing unit. For this horizontal closing unit, several options are available like a horizontal heat sealer or different kinds of tail closing units with a plastic clip or a metal closure. Because the machine is working with an open and close filling hole, an extra high transport strip (60mm) is not needed on the foil from the roll. This leads to a material saving up to 5%.

Description Specifications Options

Description

Poly filling and sealing machine for either pre-fabricated bags or half tube PE poly from the roll. When the bag is filled it is separated and then closed by a horizontal closing unit. For this horizontal closing unit, several options are available like a horizontal heat sealer or different kinds of tail closing units with a plastic clip or a metal closure. Because the machine is working with an open and close filling hole, an extra high transport strip (60mm) is not needed on the foil from the roll. This leads to a material saving up to 5%.

Furthermore, Manter packing machines are known for the following characteristics:
- Lowest TCO available in the market
- Heavily constructed frame
- Safe and easy to operate

Specifications

Foil height (mm)300 - 700
Foil width (mm)250 - 450
Foil thickness (μm)35 -65
Packed weight (kg)0,5 - 10 (2*)
Air consumption (conditioned dry air)250l/min at 6 bar
Capacity at 2,5 kg bags28 pcs/minute
Supply voltage (V)3x 400 Volt/50 Hz + N + GND
Power consumption (kW)6
LxWxH (cm)480x120x200
Weight (kg)600
1* depending on fill opening
2* depending on product, bag and discharge system

Options

0202-594Double support belt for crop closure
0216-010Taper closing unit, excl. control box.
B000009Roll Stock Bagger Cutting knife (choose 1 of 3 compulsory options)
B000010Roll stock Bagger Vertical sealer including a punching unit (choose 1 of 3 compulsory options)
B000011Roll stock Bagger Vertical sealer (choose 1 of 3 compulsory options)
B000013Photocell filling hole control
B000015Cooler
B000016Frame for Kwiklok 865 closing unit
B000017RSB on wheels
B000018Step frame for RSB-P
B000019Duck beak chute
B000020Kwiklok model 865 Closing unit
B000054Double fillinghole (200 mm for 1 and 2 kg, 330 mm for 5 kg)
B000055Height adjustment for 10 kg bags
B000067Frame for mounting the printer
B000077Vibrating hopper or fixed hopper for RSB-P
B000080Adjustment to allow poly up to 750 mm height
B000082MMG Slave unit: to connect the PLC of the bagger with the router in the weigher
 
Dealers near your location