X
Menu
X

APH Group Engineering

Onion peeler OP-120

An unique technology using permanent supper magnets to position, rotate, clamp and release onions in a machine environment, based on the physical position of the onion in the machine Frictionless!!

Description Specifications

Description

An unique technology using permanent supper magnets to position, rotate, clamp and release onions in a machine environment, based on the physical position of the onion in the machine Frictionless!!

A magnetic driven peeling works with 6 holders i.s.o. 4 which Result is;
- a higher capacity
- a slower turning and rotation of the onion.
- A better control of the peeling process.
- less moving parts as in a the conventional system (only 150 components i.s.o 600 parts)
- a very open construction, easy cleaning of the peeling wheel.
- a higher hygienic and easier and faster to clean.

The peeler/cup chain can handle onions with a diameter of ± 55-130 mm, but to obtain good peeling results it is advised to pre-size the onions; the diameter difference should be more then ± 20 mm (1").
Also the onions should be of a reasonable quality, in general round shape and deleafed product.
The better the quality the less waste you will have

Specifications

Drive for topping and tailing (kW)1,5
Drive of cup chain (kW)1,5
Drive of centrifugal ventilator (kW)0,5
Capacityup to 85-110 onions per minute*
Air consumption (conditioned dry air)1,2 m3/min @ 6 bar
Water consumption (L/h)3
Water connection1/2 inch
Voltage380 V3 Phase 50/60 Hz
Weight (kg)1000
1* depending on quality of onions, operator experience and size of the onions
 
Dealers near your location