X
Menu
X

Agricola

Vegetable sowing machine SNT 3-290 15TR

SNT-3-290 model is suitable for all types of vegetables. The machine is designed for the triple line sowing and features three single seeding units, adjustable from 9 to 12 cm This multipurpose machine can be equipped with as many seeding elements as needed to meet the specific requirements of the farmer and according to the different type of seeds. The tool bar ensures easy movement of the elements to obtain the various distances between the rows

Description Specifications Options

Description

SNT-3-290 model is suitable for all types of vegetables. The machine is designed for the triple line sowing and features three single seeding units, adjustable from 9 to 12 cm This multipurpose machine can be equipped with as many seeding elements as needed to meet the specific requirements of the farmer and according to the different type of seeds. The tool bar ensures easy movement of the elements to obtain the various distances between the rows

Unique points
- The disc turns in the opposite direction of travel. This direction of rotation minimizes "bounce" of the seeds leading to much more accurate placement.
- Norton gear system provides simple and fast gear change to vary seed spacing.
- All sowing units are equipped with top and bottom singulators to ensure accurate singulation and with four sprockets for the rotation of the disc.
- A separate compressor is used to keep the seed holes in the disc clear, rather than relying of the exhaust of the suction fan. This ensures that only dry and clean air, at the correct pressure, is used. This is particularly important with small seeds, especially if they are dressed or dusty.

Specifications

Sowing elements15
Sowing lines (pcs.)45
Depth wheelsRubber front and rear 170 mm wheels
Coulter45 Single line
Toolbar6 meter Quebec frame
Tractor connection3-point hitch cat-2
Drive wheels4 adjustable drive wheels 6.00x16
Agitators1 per sowing unit
Wheel track (cm)150-adjustable
Sowing unit3 standard per element
Hopper1,5L per element
Power requirement (hp)95
Minimum distance between elements (mm)300
Min./Max. distance between lines (mm)40-60
PTO shaft6 splines
Sowing discs1 set included to the machine ( to define)

Options

10010102500,25 meter wider standard frame(maximum width for SN model is 3,5 meter for SNT is maximum 3 meter)
10020307007.00m quebec toolbar i.s.o of 5.00m toolbar (also add 1001010250 until frame width is 7.00 meter)
10020309009.00m quebec toolbar i.s.o of 5.00m toolbar (also add 1001010250 until frame width is 9.00 meter)
101101108080cc Hydraulic motor with support for hydraulic drive i.s.o. PTO drive
1011050025170x20 Steel seed press wheels SNT3 ( price per element)
1011050027170x20 Rubber seed press wheels SNT3 ( price per element)
1011050027L170x20 Rubber seed press wheels SNT3 together with longer elements ( price per element)
1011062400SDC seed control monitor
1011063006UC 300 digital hectare counter
1011080122Front clod pusher for SNT3 model ( price per element)
101512Stainless steel wheel i.s.o rubber(each element has 2 rubber wheels standard) Price per element
2080196Seedhopper extension 3,5 L for (total 5 liter hopper) (price per seedhopper)
APH-OPTAGR006Skid to load the machine in container
APH-OPTAGR0078 spline yoke & cross (separate)
SNT3320L001SNT-3-320 sowing element i.s.o standard element (230 element frame-400 mm width-170mm steelwheels
 
Dealers near your location