X
Menu
X

Agricola

Vegetable sowing machine SN 1-130 4SR

The SN-1-130 model is suitable for the sowing of all types of vegetables. The single line sowing system is based on one outlet coulter and a disc with one line of holes. This multipurpose machine can be fitted with as many seeding units as needed to meet the specific requirements of the farmer and equipped with everything necessary to handle all the different types of seed. The tool bar ensures easy movement of the units to obtain the required distances between the rows.

Description Specifications Options

Description

The SN-1-130 model is suitable for the sowing of all types of vegetables. The single line sowing system is based on one outlet coulter and a disc with one line of holes. This multipurpose machine can be fitted with as many seeding units as needed to meet the specific requirements of the farmer and equipped with everything necessary to handle all the different types of seed. The tool bar ensures easy movement of the units to obtain the required distances between the rows.

Unique points
- The disc turns in the opposite direction of travel. This direction of rotation minimizes "bounce" of the seeds leading to much more accurate placement.
- Norton gear system provides simple and fast gear change to vary seed spacing.
- All sowing units are equipped with top and bottom singulators to ensure accurate singulation and with four sprockets for the rotation of the disc.
- A separate compressor is used to keep the seed holes in the disc clear, rather than relying of the exhaust of the suction fan. This ensures that only dry and clean air, at the correct pressure, is used. This is particularly important with small seeds, especially if they are dressed or dusty.

Specifications

Coulter4x single line
Sowing lines (pcs.)4
Gearbox1x standard 10+10, 1x empty
Toolbar2 mtr standard (wider available as option)
Drive wheels2x Adjustable 5.00 x 15
Depth wheelsRubber front and rear 80 mm wheels
Sowing elements4 standard sowing elements
Agitators1 per sowing unit
Wheel track (cm)150 - 180 (adjustable)
Hopper1,5L per element
Tractor connectionStandard 3-point hitch Cat. 2
Sowing unit1 standard per element
Power requirement (hp)45
Minimum distance between elements (mm)190
Min./Max. distance between lines (mm)190
PTO shaft6 spline
Sowing discs1 set included to the machine ( to define)

Options

10010102500,25 meter wider standard frame(maximum width for SN model is 3,5 meter for SNT is maximum 3 meter)
1003010300One cylinder row markers for 2m-2.5m-toolbar
1003010400One cylinder row markers for 3m- 3.5m toolbar
1003010700Two cylinder row markers for 2.5m-3,0m toolbar
101101108080cc Hydraulic motor with support for hydraulic drive i.s.o. PTO drive
1011050001170x20 Steel seed press wheels SN1 ( price per element)
1011050039170x20 Rubber seed press wheels SN1 ( price per element)
1011062400SDC seed control monitor
1011063006UC 300 digital hectare counter
1011080120Front clod pusher for SN model ( price per element)
101510Stainless steel wheel i.s.o rubber(each element has 2 rubber wheels standard) Price per element
2080196Seedhopper extension 3,5 L for (total 5 liter hopper) (price per seedhopper)
APH-OPTAGR0078 spline yoke & cross (separate)
MIC11303Microgranulator for SN1-130 3SR
SN1002034085SN-1 DISCS FROM 002 TO 034 HOLES (DIAMETER HOLES FROM 0.70- 0.85 mm) specify the exact holes and mm
SN1035049290SN-1 DISCS FROM 035 TO 049 HOLES (DIAMETER HOLES FROM 1.80-2.90 mm) specify the exact holes and mm
SN1050079170SN-1 DISCS FROM 050 TO 079 HOLES (DIAMETER HOLES FROM 0.90-1.70 mm) specify the exact holes and mm
SN1080119170SN-1 DISCS FROM 080 TO 119 HOLES (DIAMETER HOLES FROM 0.90-1.70 mm) specify the exact holes and mm
 
Dealers near your location