X
Menu
X

Engineering

RSB-P SST version, left version for poly up to 700 mm

Manter

RSB-P SST version, left version for poly up to 700 mm

Poly filling and sealing machine made of stainless steel for either pre-fabricated bags or half tube PE

Description Specifications Options

Description

Poly filling and sealing machine made of stainless steel for either pre-fabricated bags or half tube PE
poly from the roll. When the bag is filled it is separated and then closed by a horizontal closing unit.
For this horizontal closing unit, several options are available like a horizontal heat sealer or different
kinds of tail closing units with a plastic clip. Because the machine is working with an open and close
filling hole, an extra high transport strip (60mm) is not needed on the foil from the roll. This leads to
a material saving up to 5%.

Furthermore, Manter packing machines are known for the following characteristics:
- Lowest TCO available in the market
- Heavily constructed frame
- Safe and easy to operate

Specifications

Foil height (mm)300 - 700
Foil width (mm)250 - 450
Foil thickness (μm)35 - 65
Packed weight (kg)0,5 - 10 (2*)
Air consumption (conditioned dry air)250 l/min at 6 bar
Capacity at 2,5 kg bags28 pcs/minute
Supply voltage (V)3x 400 Volt/50 Hz + N + GND
Power consumption (kW)6
LxWxH (cm)480x120x200
Weight (kg)600
1* depending on fill opening
2* depending on product, bag and discharge system

Options

0202-0518Base frame for a printer
0202-0643Vibrating hopper SST
0202-0653Vertical impulssealer, no punches
0202-0682Cutting knife SST
0202-0776Hopper
0202-0811Vertical impulsesealer Inc. Punching Unit
0224-0007MMG Slave unit: to connect the PLC of the bagger with the router in the weigher
4118-0017Single/ Dual bagger end chute
 
Dealers near your location