X
Menu
X

Samon

Onion lifter 3bed (SU2M) (3 x 2,00) model SU23B200

The three-bed Samon lifter consists of a foldable frame with three integrated lifters. The PTO of the tractor drives the oil pumps which drive the webs. The system is equipped with an oil cooler. The harvesting mechanism, lifting the onions by a rotating bar and a foam filled intake roller, is suitable for all types of field onions, i.e. drilled, module planted or onion sets. The rotating bar system works effectively in both dry and wet conditions.

Description Specifications Options

Description

The three-bed Samon lifter consists of a foldable frame with three integrated lifters. The PTO of the tractor drives the oil pumps which drive the webs. The system is equipped with an oil cooler. The harvesting mechanism, lifting the onions by a rotating bar and a foam filled intake roller, is suitable for all types of field onions, i.e. drilled, module planted or onion sets. The rotating bar system works effectively in both dry and wet conditions.
The machine is equipped with a steered axle to improve manoeuvrability on the headlands. The three beds are spread over two windrows.
The lifter is also equipped with two lifting webs, of which the rear one can be fully adjusted for maximum or minimum agitation. This guarantees perfect cleaning of the product.
Underneath the machine a wide press roller gives a flat, firm surface to the bed, onto which the onions are dropped. At the rear end of the machine adjustable windrowing chutes create an ideal windrow for fast and efficient drying of the product.
The harvester has one single and one pressure free return and its own hydraulic system, which needs a 12 volt connection. is included. Standard the machine will lay the onions in 2 swads, as option alo available to lay onions in 3 beds.

Unique points:
-High capacity
-Very manoeuvrable
-Independent suspension of the lifters
-Automatic depth control
-Adjustable speed cross conveyors
-Hydraulic adjustable web speed
-Soil free windrows

Specifications

Working width (cm)600
Track width (cm)200
Number of webs and pitch (mm)2(web), 42-42(mm)
Hydraulic outlets required1x SA (20- ltr per minute)
PTO shaftincluded
Power requirement (hp)120
LxWxH (cm)700x660x150
Weight (kg)5500
Amount of splines PTO shaft6
Width of web (mm)1.650
Lifting mechanismRotating bar

Options

APH-OPT013898 Spline yoke for Samon topper / harvester
APH-OPTSAM0513 Windrows of onions i.s.o 2 windrows.
 
Dealers near your location