X
Menu
X

Dewulf

Carrot harvester GB I

Dewulf’s 1-row, trailed top lifting harvester with large bunker, enables clients to harvest during difficult field conditions with a high capacity output. The pick-up element is fitted with teethed belts for lifting carrots, turnip, red beet, celeriac, etc. The pick-up element ensures a perfect picking angle and ends in a forced haulm separation unit.

Description Specifications Options

Description

Dewulf's 1-row, trailed top lifting harvester with large bunker, enables clients to harvest during difficult field conditions with a high capacity output. The pick-up element is fitted with teethed belts for lifting carrots, turnip, red beet, celeriac, etc. The pick-up element ensures a perfect picking angle and ends in a forced haulm separation unit.
Unique are the 'Floating Shares', 2 individual harvesting elements with independent topping knives, whereby maximum stability is guaranteed, even with high speeds. Small up-and-down movements of the pick-up element do not have any influence on the position of the share arms, whereby maximum stability is guaranteed and a better cutting result is achieved.
The haulm separation unit has (per row) 2 set of 6 topping knives and is fitted with 'Labyrinth Sealing' in the bearing houses. This provides the highest degree of durability in the market, whereby even the smallest dust particles and aggressive plant fluids cannot gain access to the bearings. Two grease nipples per head lubricate all six topping blades through a central grease channel within the housing.
The drive of the haulm separation unit is done by a maintenance-free 'Gearbox Drive'. Two heavy-duty sprockets ensure a perfect synchronization of the blades. As a result, the tops of the carrots remain undamaged and the topping knives last longer.
From the haulm separation unit, product goes via the sieving web onto the hedgehog belt. The angle of the hedgehog belt can be adjusted to the circumstances.

From the hedgehog belt, a high capacity elevator takes the product to the bunker. Therefore the gooseneck of the elevators folds down into the bunker to decrease falling heights. When lifting up the bunker, the rear side of the bunker goes up at the same time to have a smaller inclination angle from the discharging bottom.

The tractor oil has to be used for the cylinders and the bunker chain, all other hydraulic functions are operated by the hydraulic unit, which is installed on the machine.

Standard you have an easily and quick access to all main components in order to do the proper maintenance. Beside of that Dewulf machines are equipped with standard parts which are worldwide easily available.

Unique points:
- High capacity
- Strong and open chassis
- Proven and tested worldwide
- Professional control unit with joystick in the cabin of the tractor
- Topping knives driven by the maintenance-free 'Gearbox Drive'
- Maintenance-free components
- Standard spare parts, worldwide available
- Very manoeuverable machine
- Easy to operate
- High cleaning capacity (sieving web and hedgehog unit)
- Perfect "grip" to product by means of teethed belts
- Reducing of falling heights
- Large bunker

Machine is standard equipped with:
- Road regulations EU
- Control unit to set the adjustments of the functions + joystick to operate the mostly used functions
- Cable set with fuse for direct connection of the control-unit and joystick of a trailed harvester to the battery of the tractor.
- Manual support foot
- Cylinder on the drawbar
- DPC: Dewulf Position Control: Cylinder on drawbar with position memory
- Set of tyres: Right; MITAS 620/70 R30 and left; MITAS 620/70 R30
- Steering wheels for trailed harvesters with wheel position indication on the control-unit + parking brake and hydraulic service brakes
- Automatic neutral position of the steering wheels

- Hydraulic equipment on the harvester (gearbox, LS pump, gear pumps, oil tank and oil cooler). Hydraulic cylinders are operated by tractor hydraulics
- 2 fixed torpedos
- Length of the harvesting belts: 14.000 mm. The machine is equipped with 370 mm large drive wheels for the harsting belts.
- Harvesting belt tensioners: automatic hydraulic tensioning of each harvesting belt (1-row)
- 6 Cutters set with flat knives, each bearing housings has two bearings and labyrinth sealing. Hydraulically driven, synchronisation of the cutters is made sure by a closed gearbox. (1-row)
- Reversing of the cutters, harvesting belts, optional rotary torpedos, optional rotary cleaners from the cabin (together or individually reversible)
- Speed of the harvesting belts and the cutters adjustable from the cabin
- 2 Hydraulically driven rollers: 1 roller below cutter set (to avoid loss of carrots) + 1 entrance roller of the haulm cover (to avoid haulm accumulation on the frame of the cross conveyor)
- Cross conveyor: width 800 mm, speed adjustable on the machine
- Hedgehog unit: width 1.000 mm, length 1.680 mm, inclination adjustable from the cabin, speed adjustable on the machine
- Discharge conveyor: width 800 mm. The small inclination makes a high discharge capacity possible into the bunker: pitch 28, rubber covered, 140 mm rubber flights. Speed adjustable from the cabin.
- Automatic falling height from the discharge conveyor
- Bunker: capacity of 8,2 m³ (4,5 ton). Maximum discharging height 3.950 mm, minimal discharging height 1.300 mm
- Automatic filling of the bunker





Specifications

Rows (no.)1
Bunker capacity (kg)4.500
Bunker discharge height (mm) min. - max.1.300 - 3.950
Tyres2x 620/70R30
Length harvesting belts (mm)14.000
Width sieving web (mm)800
Width hedgehog belt (mm)1.000
Hydraulic requirement1x DA
Power requirement (hp)100
LxWxH (cm)873x348x372
Weight (kg)8.950
Amount of splines PTO shaft6

Options

CAR-1205Second operating console in the tractor for more comfort during bunker unloading
CAR-12346Bunker with loading optimization: capacity of 10 m³ (5,5 ton). (only icw D-35025GK2)
CAR-12347Weight control system: pressure measurement on the bunker. (weight showed in cabin)
CAR-13001 monitor with 2 cameras + lighting
CAR-13010TCamera system: 1pc. Quad, 10” screen with 4 infra-red cameras (for trailed machine)
CAR-1307GBWorking lights GBI/GBII: LED instead of the standard mounted halogen ligths
CAR-1500Area counter (tractor need to have ISO 11786-connector, no ISOBUS)
CAR-17023Hydraulic adjustable fall breaker at the end of the bunker (metal slide off)
CAR-17024Hydraulic foldable box filler chute (box should be minimum 800 mm x 1.000 mm)
CAR-17026ESensor in the center of the container loader, which controls the feed from the bunker
CAR-17026GContainer loader (cross web) at the end of the bunker
CAR-17301Additional cable with fuse to connect a second tractor (needed to operate with terminal)
CAR-1733Towing ball K80 (i.s.o.of fixed towing eye) (towing hitch 420-570 mm from the ground)
CAR-17332Rotary towing eye (iso. fixed towing eye) (towing hitch between 420-570 mm from the ground)
CAR-17334BFixed towing eye D40 (instead of fixed towing eye)
CAR-17339KRussian hydraulic coupling
CAR-2201Orange side lights every 3 meters
CAR-30074GK2Bigger oil cooler (needed within extreme hot harvesting conditions: +40°C) (not icw D-3502GK2)
CAR-31022GK2Hydraulically adjustable support stand of the machine (adjustable from the cabin)
CAR-320810DRight tyre: MITAS 620/70 R30 and left tyre: MITAS 2x 300/85 R42 (i.s.o standard tyre)
CAR-320810L1 Extra left wheel: MITAS 2x 300/85 R42
CAR-32289DRight tyre: TRELLEBORG 850/45B R30,5 left tyre: MITAS 2x 300/85 R42 (i.s.o standard tyre)
CAR-32289GRight tyre: TRELLEBORG 850/45B R30,5 left tyre: TRELLEBORG 850/45B R30,5 (i.s.o standard tyre)
CAR-3303P3Automatic lubrication system for the cutters
CAR-3307GK2Machine filled with bio oil PANOLIN HLPsynth (+/- 250 l)
CAR-35023Hydraulic wheel drive on both wheels with control of the traction from the cabin + hydro-pneumatic s
CAR-35025GBSSide-shift left wheel: hydraulic adjustment of the track width (+400 mm) (for better stability)
CAR-3502GK2Hydraulic driven wheels with traction control from cabin (not icw D-3503GK2 and D-3103GK2)
CAR-3503GB2Air brakes with pressure vessel on the harvester (instead of standard hydraulic brakes)
CAR-41521ADC (Automatic Depth Control), proportional sensors controllable from the cabin
CAR-4153DAS (Dewulf Automatic Steering) automatic steering on the pole
CAR-42311 day assistance of Dewulf technician during start-up of a new machine (exclusive flight tickets)
CAR-4232"2 day assistance of Dewulf technician start-up (inclusive hotel costs; exclusive flight tickets)"
CAR-4233"3 day assistance of Dewulf technician start-up (inclusive hotel costs; exclusive flight tickets)"
CAR-430826 Cutters with “half moon” knives (i.s.o. standard cutter)
CAR-4312Hydraulic driven torpedoes
CAR-44091GBCStone security on 1 shares (break bolt system)
CAR-44621ZReversing of the cutters and belts, from the cabin (together or individually reversible)
CAR-45635GBCQuick release system of the tensioning rollers
CAR-4564GK2Hydraulic duo agitator in the cross conveyor, speed adjustable on the machine
CAR-4568Hydraulic driven rotors for cleaning carrots under the top lifter belts (2 pieces)
CAR-4568GBHydraulic driven rotors for cleaning carrots under the top lifter belts (1x 3 pcs.)
CAR-4601GK2Press-out roller in the cross web
CAR-4608GK2Inspection platform for 1 person (equipped with emergency stop button)
CAR-4674GK2Hydraulically driven entrance roller of the cross conveyor (only in combination with D-46710)
CAR-46751GB2Speed of the cross web and the hedgehog unit adjustable from the cabin (i.s.o. on the machine)
CAR-46751GK2Speed of the cross conveyor adjustable from the cabin (instead of adjustable on the machine)
CAR-48022Syncro Flow via the signal from the tractor ( must have an ISO 11786 or DIN 9684 connector)
CAR-49524GK21 hydraulically driven row divider with 4 chains adjustable from the machine (not for EU)
CAR-49545GSyncro Flow with radar: synchronisation of the speed of the belts related to the driving speed.
CAR-49548SCPExtra harvesting share for celery root
CAR-4955ZShare arm protection: Spring system at the connection of the share arm to the chassis
CAR-6004Extra harvesting share for red beet
CAR-710212XDeduction for not having the hedgehog unit
 
Dealers near your location