X
Menu
X

Miedema

Store loader ML 1970

The Miedema ML store loaders stand for high capacity, while taking care of a product friendly handling of all crops during loading of the storage. The ML store loaders are standard equipped with a PVC belt of 70 cm wide. The compact construction of the contra weight assure a minimum falling height during storage loading. The ML store loaders can be equipped with several control units to assure maximum user friendly operation of the machine. In combination with the Miedema Start Control the storage can be filled safely and easy under all circumstances. The machine is standard equipped with; working light, bumpers for swivel angle limiters, product detection, transport position end switch & pull-in end switch.

Description Specifications Options

Description

The Miedema ML store loaders stand for high capacity, while taking care of a product friendly handling of all crops during loading of the storage. The ML store loaders are standard equipped with a PVC belt of 70 cm wide. The compact construction of the contra weight assure a minimum falling height during storage loading. The ML store loaders can be equipped with several control units to assure maximum user friendly operation of the machine. In combination with the Miedema Start Control the storage can be filled safely and easy under all circumstances. The machine is standard equipped with; working light, bumpers for swivel angle limiters, product detection, transport position end switch & pull-in end switch.

Unique points:
• Variable belt speed by means of frequency converter
• Foldable drawbar for user friendly operation
• Rubber caps on the swiveling plate to prevent moving & floor damage
• Low input height because of the compact contra weight
• No rollers under the input to assure maximum product friendly handling
• Switchboard equipped with all function switches, to operate without remote control
• Fully integrated hydraulic aggregate including drip tray, to avoid leaking of oil
• Standard Start Control, to start and stop all Miedema machines in line
• The castor wheels have been installed at an angle to the ground to prevent the machine from “running off”
• Variable swivel and drive speed by means of a proportional valve
• Wheel guards to prevent product damage on the floor
• 2 inspection hatches on each side of the machine, for easy maintenance
• Deep V-shaped PVC conveyor for maximum capacity
• Bended conveyor end to assure a low dropping height in combination with the small top roller
• Belt control set to prevent the conveyor belt from running out of alignment
• Belt drive by means of a drum motor
• The drive drum is lined with special rubber material to generate maximum friction
• The support of the rollers have eyelets for hanging the cable of the remote control to prevent the machine from driving across the cable.

Specifications

Min. discharge height (cm)35
Belt materialPVC
Supply angel min.-max.1° - 28°
Input height (cm)105
Max. discharge height (cm)840
Min.-max. length conveyor (cm)1118-1856
Reach in front of wheels/supports (cm)1216
Belt shapeV-shape
Belt width (cm)70
Weight (kg)4300
Belt speed (m/min)24-96 (variable)

Options

10005440TAT-ML coupling
10019880Powder dosing unit
10028630Load-Control
10055630Scrapers on support rollers main frame
10055730-1Scrapers on support rollers extraction frame
10079690Grain cloth
10099910Input raising kit (Z model)
10921030ML-Comfort+ with wireless remote control
10923610Set demountable contra weights
10924850ML-Comfort with wired remote control
10950580Lateral transfer ML 1670/1970
10965430Preparation input raising kit
E0001606Can-bus kit, including 20 metres cable
E4003213Electrical preparation for powder applicator
 
Dealers near your location